Ore Milling Equipment is suitable for crushing materials with particle size more than 3mm. According to the difference between feeding opener and output sizes, they are usually separated: primary stone crusher, secondary stone crusher (medium crusher) and fine stone crusher. stone crusher can used as slag crusher, quartz crusher, lime stone crusher, granite crusher, iron ore crusher, marble crusher and so on. Stone crusher aggregates are used for construction of roads, bridges, housing, industrial building construction and other cement based products like RCC pipes, PSC poles, pre-molded slabs, frames and beams, etc for fabrication. It is advantageous if the Stone crusher unit is set up near the quarries where the granite boulders of various sizes are available for the crushing unit. The wastage from the granite industry will be of much use to the Stone crusher unit.
When the raw materials are very hard, generally speaking, Ore Milling Equipment
.jpg)
and cone crusher are often used as primary crushers; and when the raw materials are not very hard, the customers can choose impact crusher as primary crusher. The granular composition of the raw materials also influences the general parameters. As for the rocks produced by exploding in the quarry yard, the customers should choose primary crusher according to the biggest granularity of the rocks; as for sand-cobble raw materials, the selection of primary crusher should be based on grading curve and the pre-screening machines should be equipped; when the mud and water content of the raw materials is high, wet crushing and screening flow should be considered.
