the surface of all soft and flat out after dry stand-by, but not by fire or electric furnace preheating; semi rigid PVC plate with silk
cotton dipped in acetone: gasoline (1:8) mixed solution degreasing
dewaxing. Preheating and removal of wax plastic plate, should be placed
in the room to be laid at least 24h,
in order to adapt to the paving environment. 14, on the cement base layer with plastic floor surface, its base surface should be smooth,
hard, dry, smooth, clean, no grease and other impurities (including
sand).
The finger board is made by splicing a plurality of wood boards. The upper and lower parts are no longer glued and clamped. Because the
vertical boards use a saw-tooth-like interface, similar to the two
fingers crossing and docking, they are called finger boards.
composite decking suppliers in south africacomposite floor boards for porchhome plastic swimming pool floordoes composite decking float or sink
