Surface phenomenon: wooden floor tilt up both sides of the landscape, like tile. Analysis of the reasons: the water content of the concrete base or the adjacent wall moisture content is too high; the construction of the concrete base had water splashing, mixed with water-containing materials, resulting in concrete moisture content increased;Not according to the requirements of waterproof, moisture isolation blocking measures; keel moisture content is too high, the moisture evaporated by the back of the wooden floor moisture absorption; laying of wood flooring under the surface of pipe leakage, indoor temperature condensation formation of water; wipe.Preventive measures: The concrete foundation must reach the water content requirement before construction. When the water content exceeds the standard, the moisture-proof insulation layer must be paved. The moisture-proof insulation layer should be sealed as a whole, and the waterproof and moisture-proof isolation block measures should be taken.Solution: Remove the wooden floor around the room to allow it to dissipate the tide can partially alleviate the deformation of the deformation of the wooden floor to be replaced; if the larger deformation of the wooden floor, the demolition of the paved wood floor to be the concrete floor or keel, Dry and re-paved. Replaced the original available wooden floor, the impact of the use of wooden floor to be replaced."
water resistant wood panel walls,
building a simple bench with wood and brick,
boat attractive wood floor importers service "
