During maintenance, be sure to keep the floor dry and clean. In general, the floor moisture content is generally maintained at 8% to 13%. In normal conditions, the floor will not be a problem. Improper laying and improper use can also cause quality problems in solid wood flooring. For example, when laying, there is no moisture-proof treatment; water is wet or scrubbed with alkaline water and soapy water; this will destroy the brightness of the paint; the bathroom and the room floor are not well isolated.In the summer, no attention was paid to pulling the curtains so that the floor in front of the window may be discolored and cracked after exposure to hot sun exposure; or the temperature of the air conditioner may be too low, causing the temperature difference between day and night to change too much, causing the floor to expand or contract excessively violently, causing deformation cracking, etc.When the floor is in use, if individual floors are found to be warped or detached, the floor shall be taken in time, old glue and ash shall be removed, new rubber shall be applied, and compacted; if the individual floor paint film is damaged or white, 400 water may be used. Sandpaper, soap, and water are used to polish, then wipe clean. After drying, apply a complementary color. After the color is dry, apply a coat of paint. After 24 hours of drying, polish with a 400-grit water-sand paper and then polish with wax."
Sea Tek Synthetic Floor,
Fence Built Out Of Palettes,
Wpc Fence For Garden "
