Moth-eaten: Because of the insects in the wood bite-eaten, the surface of the wood often see a pile of piles of powder, annoying. The reason, with the selection of wood flooring. To prevent moth-eaten, one is to buy through the kiln drying process wood flooring produced, despite the more expensive, but the eggs have been completely killed in the wood; the second is to carefully choose the keel, who are insects or bark No need.Grilled seams: Some wood flooring shop for a few days, there will be a larger gap between the slats. This is mostly related to the water content before laying the wooden floor is too high, due to indoor heat or shrinkage. Note that the moisture content before the laying of wooden flooring should be within the range of 8% - 13%, and after the oil shop in time.Sounded: As the quality of the wooden floor is not laid, people will make a squeaky noise when walking around and feel very uncomfortable after hearing it. To this end, pay attention to the keel and the ground, the floor and the keel between the firm, with the appropriate number and length of the nail. At the same time, to prevent too much keel spacing or moisture content is too high, or loose dry shrinkage after laying, will also have a certain impact.Dirty board: refers to the wooden floor after some paint, giving people a kind of unclean "gray" feeling, and some even footprints clearly visible. To avoid this situation, pay attention to the wood floor surface after grinding to brush the oil before cleaning is essential."
can you bleach teak wood deck,
neo pvc flooring kenya daily post,
price engineered beams "
