105 * 1.2 * 16 cutting disc is a specialtool for grinding hard and hard alloys such as cemented carbide, glass,
ceramics, gemstones, etc. Metal bond cutting chips are mainly made of sintering
and electroplating according to different manufacturing methods; . So how to
maintain the 105 * 1.2 * 16 cutting disc? Let’s take a look at it together:
1. If the cutting piece is not usedimmediately, it should be laid flat or suspended by the inner hole. The other
pieces or feet should not be stacked on the flat saw blade, and attention
should be paid to moisture and rust.
2. When the cutting piece is no longersharp and the cutting surface is rough, it must be repaired in time. Grinding
does not change the original angle and destroys the dynamic balance.
3. The inner diameter correction of thecutting piece, the positioning hole processing, etc. must be performed by the
factory. If the processing is poor, it will affect the product use effect, and
danger may occur. The hole reaming should not exceed 20 mm in the original hole
diameter in order to avoid affecting the stress balance.
