115 * 1 * 22 cutting disc are mainlyresin abrasives made of chemical synthetic fiber fabrics with high tensile
strength, impact resistance and flexural strength, and high line speed when
used. The grinding wheel of the cutting piece is often mounted on the electric
and pneumatic sander. It can repair various metal surfaces, clean welds, solder
joints, rust, sanding burrs, flash edges, repair surface defects and workpiece
slotting. And cut off work. The cutting wheel is highly efficient and safe, and
is suitable for chemical, shipbuilding, machinery, automobile, construction and
other industrial sectors.
Small size 115*1*22 cutting disc, can beinstalled in the electric angle grinder, large size cutting piece, can be
installed in the profile cutting machine. A cutting type thickened
explosion-proof resin grinding wheel, which is not easy to crack and burst when
used, has high strength, can be used for grinding and polishing various
workpieces, and can be used for cutting workpieces or materials, and the
thickness of the grinding wheel body is 3~10layers of elastic layer, each layer is 5~6mmthick, the layer is an abrasive layer between layers, and there are reinforcing
ribs distributed along the radial direction. The outer diameter of the wheel
body is F200~F400mm,the thickness is 15~60mm,and the inner diameter is F25~32mm;the elastic layer is glass fiber or nylon fiber filament sheet, the overall
stability and strength are improved, the noise is reduced, the dust is reduced,
the safety feeling is enhanced, the wear resistance is greatly improved, the
cost is low, and the structure is simple, so Has a wide range of applicable
prospects.
