?Resin cutting sheets, also known as
12 inches cut off wheel, are mainly resin abrasives made of chemical synthetic fiber fabrics, which have relatively high tensile, impact and flexural strength, and have high line speed when used. Resin grinding wheels are often installed on electric and pneumatic sanders. They can repair various metal surfaces, clean welds, welds, rust, sand burrs, flash edges, repair surface defects, and workpiece grooving and cutting. jobs. The use of resin grinding wheels is efficient and safe and is suitable for chemical, shipbuilding, machinery, automotive, construction, and other industrial sectors.
Safe use of cutting blades:
1. Use an angle grinder with a safety cover, a cutting machine with a safety cover;
2. Wear protective glasses, masks, earplugs, gloves, dustproof clothing;
3. The high use cycle speed of the ultra-thin resin cutting piece is used below the high number of revolutions;
4. The side of the resin cutting sheet cannot be used;
5. Use the correct flange. No enhancement: 1/3 or more; there is enhancement: 1/4 or more;
6. Before use, confirm that the resin cutting piece has no missing edges, no cracks, no cracks, etc.
7. Store the resin cutting piece in a place where there is no direct sunlight, no moisture, and place it horizontally;
8. Shandong Weiyuan Abrasives Co., Ltd. recommends that before using the ultra-thin resin cutting sheet, please use it for one minute and then use it. When replacing the new type of resin cutting sheet, please idle for 3 minutes before using it;
9. The fixed object is firmly fixed;
10. If the inner diameter of the
hot sale 9" cutting off wheel is small and the device does not match, please do not change the hole diameter of the grinding wheel.
Do a good job of the above safety protection measures to ensure the smooth progress of high-efficiency production work!
