Attention problems when operating vertical mill

Vertical mill is widely used in the grinding and Used Portable Concrete Crusher Philippines processing of mineral materials in the fields of building materials, metallurgy, chemical industry, mining, etc. It can process materials with Mohs hardness below 7 and humidity below 6%. Non-flammable and explosive materials, the fineness of the finished product can be adjusted arbitrarily between 325 mesh. Through the joint action of the analyzer and the fan, it can meet the needs of different users. Some customers' improper operation can make the mill Some minor problems have occurred. In order to prevent the vertical mill from being used correctly and to prevent accidents, today we will summarize the problems that should be paid attention to when using vertical mills:
1. In order to make the vertical mill powder machine normal, the equipment “safe operation system for equipment maintenance” should be established to ensure the long-term safe operation of the vertical mill, and necessary maintenance tools as well as grease and corresponding accessories. 2. When the grinding roller device of the vertical mill is used for more than 500 hours to replace the grinding roller, the rolling bearings in the roller sleeve must be cleaned, and the damaged parts should be replaced in time. The fueling tool can be used with manual fuel pump and grease gun.
3. During the use of the vertical mill, there should be fixed personnel responsible for the care, the operator must have a certain level of technology. The vertical mill must perform the necessary technical training for the operator before installation to understand the principle performance of the vertical mill and familiar with the operating procedures. 4. After using the vertical mill for a period of time, it should be repaired. At the same time, the wearing parts such as the grinding roller and the blade should be repaired and replaced. The grinding roller device should be carefully checked before and after use to see if the connecting bolt nut should be carefully checked to see if There is looseness, and the grease is added.