The comprehensive and effective application of slag in industrial production, cement production and the production of new energy sources, the market share has increased. Slag manufacturers seize business opportunities to carry out deep processing of slag. Widen the market application through the production of different fineness of slag powder.
Some major factories in industrial production usually use slag to make and refine it into slag cement, slag fine powder, slag powder, slag portland cement, slag cotton, blast furnace slag, granulated blast furnace slag powder, copper slag and other materials. Among them, slag 400 mesh finished products are more widely used.
The
ultrafine mill can process 325 mesh to 3000 mesh slag finished products with uniform fineness and high output. The main part is composed of a host, a reducer, an analysis machine, a fan, a bypass powder collector, a maintenance platform and an electric control cabinet. Auxiliary parts are composed of jaw crusher, bucket elevator, electromagnetic vibration feeder, storage bin, etc.
For the production of 400 mesh slag finished products, the working principle is that the main motor of the slag milling machine drives the main shaft and the turntable to rotate through the reducer, and the roller pins on the edge of the turntable drive dozens of grinding rollers to roll in the grinding ring raceway. Large pieces of slag material are broken into small slag particles by a hammer crusher, and then sent to the storage bin by the elevator, and then passed through the vibrating feeder and the inclined feeding pipe to uniformly send the material to the upper bulk tray of the turntable. on.
The material is scattered to the periphery of the circle under the action of centrifugal force, and falls into the raceway of the grinding ring of the slag mill. The action sucks the outside air into the machine and brings the crushed material into the slag mill powder separator. The rotating impeller in the classifier makes the coarse material fall back and grind. The fine powder that meets the requirements enters the cyclone powder collector and is discharged through the lower discharge valve, which is the finished slag product. The air flow with a small amount of fine dust is After being purified by the pulse dust collector, it is discharged through the fan and muffler.
Its production reflects the characteristics of high efficiency, energy saving, safety, reliability, environmental protection and energy saving, and promotes the renewal and expansion of slag use. Speed ??up the use of slag resources as much as possible. Let this once discarded piece of gold dazzle.
