Introductions of gravity separation of antimony

Antimony ore dressing Dolomite Ultrafine Mill methods need according to the type of antimony, mineral composition, mineral structure and disseminated extent characteristics determine the physical and chemical properties. Gravity separation method for most fit for antimony ore dressing, for antimony ore is of big density, particle size of coarse mineral, easy to use gravity separation method.Antimony antimony huang hua, red antimony, China this three belong to vulnerable re-election of antimony, only water antimony ore belongs to the density of the difficult separation.In short, whatever the type of antimony, almost all have good re-election conditions.Re-election inexpensive, but also within the scope of the coarse grain sorting out a large number of qualified coarse concentrate, discarding the large amount of waste rock, so gravity separation method is still the antimony ore dressing is now ready to choose one of the methods.
Sometimes re-election method cannot be directly output qualified antimony concentrate, but as the primary job of the antimony floatation, are often more and more people.Especially when dealing with antimony oxide, re-election is particularly important to the primary, gravity separation method and therefore became the main separation method of antimony oxide.
antimony gravity concentration equipment. Antimony gravity concentration equipment generally refers to the jig and the shaking table.Jig used in processing crude, grained disseminated ore, while shaking table for antimony gravity separation of fine grained disseminated.As the jig technology and equipment constantly upgrade and improve, in fine grained material processing field, also got good separation indexes, thus, table widely application in the field of antimony ore dressing is not. Jig is almost the only re-election of antimony re-election equipment.