1. Bearing
The bearing of the
ultrafine roller mill bears all the load of the machine, so good lubrication has a great relationship with the service life of the bearing. It directly affects the service life and operation rate of the machine.
[img width=320,height=180]https://www.gravelmill.com/d/file/knowledge/2019-12-02/cc72370a58a006d35a442d44c7ad8ad9.jpg[/img]Main oil filling place of this machine:
- (1) rotating bearing
[/*]- (2) roll bearing
[/*]- (3) all gears
[/*]- (4) movable bearing and sliding surface.
[/*]
2. The newly installed hoop is easy to loosen and must be inspected frequently.
3. Pay attention to whether all parts of the machine are working normally.
4. Pay attention to check the wear degree of wearables, and replace worn parts at any time.
5. On the floor of the bottom shelf of the moving device, dust and other materials should be removed so as to prevent the machine from moving on the bottom shelf when it encounters materials that cannot be broken, resulting in serious accidents.
6. If the bearing oil temperature rises high, stop the vehicle immediately and check the reason to eliminate it.
7. If there is any impact sound during the operation of the rotating gear, it shall stop and check immediately and eliminate it.
Raymond Mill: https://www.gravelmill.com/product/grinding/raymond-mill.html
