Spiral Fuit Juicer is to absorb the international advanced technology developed from. The machine is widely used, can be squeezed watermelon, grapes, strawberries, pears, apples, lemons, oranges, oranges, tomatoes, papaya, radish, ginger and other fruit and vegetable juices.To get more news about
Spiral juicing machine, you can visit hl-juicer.com official website.
Characteristics of Multi-purpose Spiral Fruit Juicer:
1, Advanced design, compact structure, beautiful and generous.
2, The machine is composed of two parts of crusher and spiral juicer, complete the process of crushing, pressing and slagging automatically.
3, The use of tapered screw, large capacity, high juice rate.
4, Energy efficient, low noise, no pollution.
5, All parts of the contact with the material for the stainless steel;
After the broken pulp, juice, skin into the spiral through the hopper into the juicer, as the screw along the slag exit direction of the bottom diameter gradually increased and gradually reduce the pitch, when the material is screw propulsion, due to spiral cavity volume reduction, the formation of The press of the material. The direction of rotation of the helical spindle is clockwise as seen from the hopper towards the slag. The raw material is fed into the hopper and compressed under the advance of the screw, the squeezed juice flows into the bottom juice container through the filter, and the waste material is discharged through the annular gap formed between the helix and the tapered part, Adjustable head along the axial movement can adjust the size of the gap. For the clockwise (from the device to the hopper from the slag into the end of the wheel when turning hand wheel housing, the regulator head to the left, the gap is reduced, otherwise the gap becomes larger.) Change the size of the gap, Of the resistance, you can change the slag rate, but if the gap is too small, in the strong extrusion, the part of the slag particles and juice will be squeezed out through the filter, although the juice increases, but the relative decline in juice quality, Size should be based on user specific process requirements. So as to achieve the purpose of automatic separation of juice and slag.
