The demand for the mask has a rapid growth in recent years, especially after the outbreak of the epidemic and the mask machine becomes important for satisfying the growing need for the mask.
The commonly used accessories of mask machines include
magnetic powder brake, air shaft, servo all-in-one web guide system, servo web tension control system, safety chuck, etc.
Magnetic powder brake
The magnetic powder brake is a novel transmission element, adopting powder as the medium, magnetic particle chain formed to transmit torque when energized, which is mainly composed of inner rotor, outer rotor, magnetic coil and magnetic powder. When the coil is not powered, the active rotor rotates. Due to the centrifugal force, the magnetic powder is smashed on the inner wall of the active rotor, and there is no contact between the magnetic powder and the driven rotor. After the DC power is turned on, the electromagnetic field is generated, and the working medium magnetic powder forms a magnetic powder chain with the magnetic line action, which connects the inner rotor and the outer rotor, thereby achieving the purpose of transmitting and brake torque.
Air shaft
The air shaft is based on the principle of air compression. The outer diameter of the shaft is changed and the roll core is privileged, facilitates the transmission of the material on the production line. It is not necessary to unload the whole shaft for unloading materials of the air shaft and the materials can be taken away after direct venting. Since its width is not large, the natural operation is also more convenient. The air shaft is selected for the machine with a lightweight and small width.
All-in-one web guide system
The servo all-in-one web guide system is working, when the web guide sensor transmits the infrared light, ultrasonic, particle beam, or monochromatic light-detecting the web, sending the signal to another sensor. After the sensor finds the web offset, according to the commands set in advance, the controller makes the web guide steering structure swaying and correct the web edge position. The automatic web guide system adopts a photoelectric sensor, ultrasonic sensor, or CCD sensor to detect the edge of the web, and the measured portion deviation signal will be sent into the sensor, and the motor is controlled by the manipulation module.
