In recent years, with the people's living standards rising, the vigorous development of the interior decoration industry, solid wood flooring production and sales are gradually expanding. We know that solid wood flooring is China's wood flooring industry earlier in the development of a traditional product, as the product from natural wood directly through the mechanical processing, which has a natural beauty, but the use of solid wood flooring in the process there have been many quality problems , Then the main performance in what areas? Let's take a look. First, the distortion of solid wood flooring. distortion caused by the floor of the main reasons are: a, making wood flooring wood is not suitable; b, improper processing and materials; floor moisture control uneven or moisture content of the floor is not suitable for use Of the environmental requirements. Solution: a, floor laying, the ground, walls, wall base to ensure that dry. B, the ground to be smooth. Second, the gap between the solid wood flooring is too large, causing the gap between the floor is too large because: a, the floor water content is too large; b, indoor environment is too dry; C, floor laying quality is not high, resulting in floor movement. Solution: a, keel and the use of the liner to go through the dry, moisture content should not exceed the local equilibrium moisture content; b, keel plane to be smooth. Third, the solid wood flooring arch, resulting in the reasons for the floor arch: a. Pavement and the wall between the base when the gap is not enough to reserve; b. Between the room and the bridge did not do bridge processing or bridge processing Leaving gaps not enough. D. The room due to water leakage, the floor by water immersion; e. The ground moist or keel wood moisture. Solution: a, laying the floor before the best ground laying a layer of plastic film; b, wood floor moisture content to ensure that the standard range, do not exceed the local equilibrium moisture content. D. Floor deformation of the floor; e. Floor tenon groove (a), the floor is not flat; (2) the difference between the level of solid wood flooring is too large, the floor difference between the level difference is too large: Processing mismatch. B, in the process of laying the floor, try not to use water-soluble adhesives, to avoid the water absorption caused by the expansion of the floor, the deformation of the keel of the keel. 5, solid wood flooring appears corrugated?B. The indoor environment is dry; the floor moisture content is too high; d. The indoor environment humidity is too big, the floor moisture content is low. 2. The floor is not suitable for the floor, the floor is corrugated. B, the indoor environment should not be too dry, do not be too wet, especially in the north of the winter, the door should not be too dry, not too wet, especially in the north of the winter , Indoors try to keep a certain degree of humidity, to prevent the wooden floor of the crack, deformation. If you are in the wood floor in the daily use of the process of similar quality problems, just by the above method to solve the package you get twice the result with half the effort.Related links:
cost anti slip decking in Norway ground level deck design free plans where can i bought wood plastic deck
