Solid wood flooring with good flexibility, warmth and comfort advantages, giving a sense of return to nature, so much consumers. However, solid wood flooring in the use and maintenance process, such as selection and laying properly, there will be some "common diseases", such as insects, chaff, sound, dirty plate, painted face, from the drums and Qiaoqiao, the following against these "Disease" Talk about wood floor treatment and floor maintenance methods. Insects: Because wood bite insects, the floor surface can often see a bunch of powder, annoying. The reason, and the selection of the floor. In order to prevent the moth-eaten, one is to buy through the drying kiln steaming process to produce the floor, even though the price is more expensive, but the wood eggs have all killed; the second is carefully selected keel, any insect or bark , All do not. Grilled seam: some floor shop a few days, between the slats will be a big gap. This is mostly with the floor before the water content is too high, due to indoor high temperature or air-drying and contraction. Note that the moisture content of the floor before laying should be in the range of 8% -13%, and after the shop to be timely oiling. Sound: As the quality of the floor laying is not high, people will move in the above issued a crunching sound, after hearing very uncomfortable. To this end, pay attention to the keel and the ground, between the floor and the keel solid, with the number and length of the appropriate nails. At the same time, to prevent the keel spacing is too large or too high water content, or laying loose after drying shrinkage will also cause some impact. Dirty board: refers to some of the floor paint, gives an unclean "gray" feeling, and some even clearly visible footprints. To prevent this from happening, it is important to keep the plate clean after the sanding. Flower face: the use of the same species of lath, the color will be a big difference. If the laying of improper, it is easy to show a "painted face." In the use of lacquer wood flooring laying, especially the great color of wood slats, you should consider the selection and deployment of slats, so that the color of the floor from shallow to deep, or gradually deep into the shallow transition. Drums: Some flooring in the shop, the damp expansion and the emergence of drums. This is mostly around the floor with the environment, especially the foundation is too influx of water or a relationship with the floor. To ensure that the floor can not afford to drum, pay attention to three points: First, the end of civil engineering, can not immediately laying solid wood flooring; Second, if the bedroom in a humid environment, to lay moistureproof floor is appropriate; Of the water content can not be less than 6%. Qiao Qiao: This is mainly because the solid wood floor has not been caused by the formal drying process. So the installation can be covered with a layer of plastic film below the floor, on the one hand play a moisture-proof and prevent the role of the floor from Alice, on the other hand has a certain sound insulation effect. In addition two or three days in advance to place the floor to lay the indoor, so that the temperature of the wood to adapt to the room, but also anti-Alice.Related links:
safety WPC Pergola Cheap WPC Pergola material High Fire Resistance Wall Panel Material
