Today, the wood flooring is the preferred home decoration materials,
Waterproof Balcony Floor but to the wood floor waxing can be a good increase in appearance, but also pest control, moisture, anti-cracking, extend the service life of the floor, wood floor maintenance is necessary measures, but in Waxing the floor when the wood if the method is not appropriate, will produce white, circle marks, and discoloration and other phenomena, just the opposite, so the wood floor waxing must find the right way. Then, the next small series to introduce the wood floor waxing methods and wood floor installation precautions. Wood floor waxing method 1, clean up the ground trash and debris, erection of construction signs.
Outdoor Floor Tile Wipe the floor with a diluted neutral detergent. For difficult to remove the stains can be satisfied that the water wipe. To prevent detergent buildup in the groove, soak the detergent wipes to try to wring. Floor wax remover will cause the floor to produce stains and bulging marks, must not be used. 2, with a neutral detergent to wash the ground with the washing machine. Wipe with a wringing cloth that has been squeezed firmly. The floor surface, especially the groove part, must wipe carefully, do not leave the detergent. Such as residual detergent and moisture, will cause the surface to whiten and bulge. 3, with a dry towel to dry the ground or wait for its natural dry.
Vinyl Fence Boards Fully dry the surface of the floor and groove of the water completely dry for the rear can be waxed. According to the season, the time required also changes, but generally take more than half a day. If not fully dried, the floor wax will not be closely attached to the floor surface, affecting the appearance, resulting in whitening phenomenon. 4, until the ground is dry, and then in its uniform surface waxing. Shake the container with the floor wax and stir well. In accordance with the direction of the wood grain carefully coated, do not leak Tu or uneven thickness. Smear too little can cause uneven shade, smear too much will lead to bad film. Keeping the thickness is the key to waxing evenly. Do not dilute the floor with water wax. Waxing tool can be used for waxing special mop, easy to operate, the effect is satisfactory. 5, until the wax completely dry, by professionals with high-speed polishing machine polishing pad with uniform polishing to the surface can be bright. 6, waxing and polishing the ground, bright and clean, particularly good sense of the effect.
The development new directions of wpc Floor wax Do not walk on the floor before drying. Drying usually takes 20 minutes to 1 hour. If the leakage coating, to make Tu. Such as the use of two waxing method, the second smear, to be completely dry after the first.
