wood-like cutting, carving, drilling, easy to operate, save time. But because of the composition of cement, so cutting tools to be particularly selected diamond tungsten steel saw blade, incision will not burn the rough, can not afford, the best effect. Can be taken HSS drill drill drill to get the best results. Before the construction, to the general woodworking 100 to 120 sandpaper first surface grinding again to remove the surface dirt. 2, available dry wood keel, galvanized keel or VIVA cement wood board cut into strips as the structure. With stainless steel gas row nail fixed (small hole may not repair), non-last resort, please try to avoid the use of hammer or hammer with nails, this will make the hole larger, flat deformation, after the repair more trouble. Used in wood keel with pointed screw, used in galvanized keel when used twist Lima screw. When using rivets on a galvanized frame, the margin (A) should be double. 3, handling, should be from the VIVA cement wood board on both sides of the long side lift. VIVA cement wood board is both the substrate, but also the surface material, so the handling and construction should be particularly careful collision, although it can be post-repair, but both time-consuming and
waterproof deck covering materialmaking planters out of compositeeasiest outdoor bench
