It is made of plastic and uses the principle of 'total internal reflection' to transmit data from one end to the other. The advantage of this is that there
is zero percent loss of data since the light is completely reflected inside
Fiber Optic Splice Closure .
This allows for data transmission over very long distances at high bandwidth. It may seem complex but its a very basic scientific phenomenon. The refraction
of light causes hallucinations such as a 'mirage' in desert or smoky effects
near vehicles in a traffic-jam on a hot sunny day.
The construction of an optical fiber consists of two parts - an inner core and an outer cladding. These parts have different refractive indexes. In layman
terms, they have different densities. The outer cladding has lesser density than
the inner core.
An fiber outlets having a switch switching function is provided with a non-conductive action plate and a two metal piece in the optical fiber socket,
the action plate is arranged between the two metal pieces, and the dust cover is
arranged on the socket mouth.
When the cover is closed at the socket, the dust cover will press the action plate so that the two metal pieces are separated and open. When the dust cover
is opened, the two metal tabs can reach the access effect and the circuit design
allows the AV terminal The socket was disconnected, so that dust, switch and
switch the protection of
DOME Fiber Closure plug from scratch.
