After the cable is fixed, the fiber from the cable is welded to the tail cable through the fiber terminal box, and then the excess
Fiber Optic Splice Closure is stored and the welded joint is protected. In the product configuration, first connect the connector on the tail cable in
the fiber terminal box to the adapter, and then connect the optical connector to
the optical connector on the other side of the adapter.
Cable in the end of the client there are many ways, two into the 8 is very representative, to explain in detail to you. Is a fiber optic cable to the
client, it is fixed in the fiber terminal box, the terminal box in the cable in
the core and pigtail fusion, such as a 8-core cable (cable has eight cores)
Then it can be through the terminal box melting out more than eight pigtails. That is, there are two fiber optic cable into a terminal box, according to the
need to melt a total of eight pigtails. For different electronic terminal
equipment networking. And then connected with the computer.
The fiber from the terminal box out of the network cable connected to the router WAN port, and then received the switch, the computer network cable is
also connected to the switch. Connector for computer settings.
Casually in a computer TCPIP set up the router gateway, and then landing the router, user name and password add static IP, subnet mask, DNS, etc., after the
resumption of the router.
DOME Fiber Closure and computer complete networking.
