the daytime light is good, with plastic sheet, hands clenched, forward tilt, the wax from the front of the body slowly scraping back, and then with fine cloth Wipe clean. 2, the furniture surface drum decorative veneer after the bubble, you can first use a sharp blade in the middle of the bubble along the direction of cutting a knife, and then use the syringe to the glue into the seam, with your fingers gently pressure in the upper part of the bubble, Will spill the glue with a damp cloth, and then use a bottom surface smooth and larger than the bubble area of ??heavy pressure on the above. In order to prevent the pressure after a small amount of glue spilled and sticky bubble around the surface, can be covered in the bubble plastic film separated, so that the decorative veneer on the flat. 3, to eliminate water mark drops in the furniture, if not immediately dry, will leave traces of water stains. In this regard, you can use a damp cloth on the traces, and then use the iron carefully press the wet cloth several times, the traces of water will heat evaporation, water marks can be eliminated. 4, repair dents Some furniture due to wood is soft, after the collision will leave a dent. At this time, you can first use a wet towel on the depression, and then iron heating pressure, you can restore the status quo. If the dent is deep, add the filler. 5, remove the old paint If you want to get rid of the furniture, paint can be
wood pool deck textureplanks of wood for gardenswood panelled garden walls in Finland
