layer bubble phenomenon, not flat. Long-term use of veneer and plate will produce anaerobic bacteria, the material deformation, affecting the use and appearance. 2. MDF door cover: the main use of MDF surface stickers do paint or paste PVC film production, because the density board is straw fiber with glue, made by high pressure, it will be in the water after swelling, mold, deformation, after expansion Its density greatly reduced, thus affecting the nail force and service life. 3. Steel door sets: the use of a steel door frame production process, the door and the door without color, formed by the steel plate, the surface using transfer paint process. Most of these doors for the single-sided lines and a single line, the installation method and the same steel doors, so that it lost the essence of steel doors and windows interior doors. 4. Multi-layer board UV paint trim door cover: is a new type of door sets, multi-layer board using wood, surface UV paint finishes, full color products, bright, due to the use of UV paint finish so that products To achieve the best use of the state, with no deformation, no cracking, moisture, heat, wear, no pollution and so on. Second, the line material is the market lines are divided into three categories: 1. Wood plastic lines: wood-plastic substrate surface foil (PVC) or stickers paint, because of its surface using the process, in the use of veneer and base
the best deals pvc decorative panel Spainoutdoor decking singapore gardenshouse fencing in malaysia
