be based on specific functions and

can increase the vitality of space. Flat doors can also be molded through the Lou milling change the classical style, but the lines of the three-dimensional sense of the lack of heavy sense, but the cost is relatively modest. Third, according to the paint 1. Look, touch the fullness of the film, this should be more than a few times will read. The paint is full, indicating that the quality of the paint is good, the polymerization force is strong, the closure of the wood is good, at the same time that the painting process is perfect, there will be no corners of the suspect; 2. standing on the side of the door to find the facade of the reflective angle Look at the surface of the film is smooth, orange peel phenomenon is obvious, there is no protruding small particles, if there are more obvious small particles, indicating that the factory coating equipment is relatively simple, at least no full pressure clean spray paint room , Which is the necessary equipment to control the quality of paint. If the orange peel phenomenon is obvious, indicating that the film baking process, but off; 3. Fancy modeling door, depending on the edge of the lines that produce modeling, especially the corners (that is, can not see the corner) Film cracking phenomenon. 4. Paint asked the type of paint, the basic answer is PU paint (polyurethane paint), PU paint is easy to polished, processing time and effort, the beli papan permainan komposit
outdoor screened porch flooring ideas
outdoor wooden stair treads