of no gloss. Some consumers are considering the floor in the end can refurbish it? The answer is yes, but not all floors can be renovated, only the surface layer thickness of 4 mm or more solid wood flooring, parquet and bamboo flooring before Refurbished. Solid wood flooring renovation steps: 1, the use of large floor renovation machinery several times to remove the paint layer polished, surface, about 0.5 mm wood layer, and then carefully sanding the floor surface so smooth, smooth to a new state. The corner of the floor is polished using a small grinder to achieve an overall smoothing effect. 2, the original edge of the transparent putty removed, re-sealed, and then the whole floor sealed primer, to be dry. 3, until the primer dry, brush the first time top coat, to be dry. 4, carefully ground with water sandpaper, the surface layer to a little rough sense of roughness, remove the powder. 5, according to the above procedure to brush three to four times the top coat, the last pass without grinding. 6, until the last "
composite fence long island ,
auto upholstery pvc fence board "
"
decks plastic fade under sun ,
plastic for outdoor decks "
