the foot test no sound after the installation A piece, if the sound should be rework immediately. Question 2: The main reason for the uneven surface is the uneven laying of grass-roots or wood floor deformation arching caused. In the laying of the construction, the application of the level of acceptance, leveling the keel surface, if the laying of uneven padded adjustment. The keel should be ventilated small slot. Paving the board from the wall should leave 10 mm of ventilation gap. Insulation insulation material must be dry to prevent damp arch floor surgery. Wood floor surface roughness should be less than 1 mm. Three problems: the seam is not rigorous In addition to the laying of non-standard construction, the width of the plate width error and poor quality processing enterprises is also an important reason, in addition to careful construction of the floor quality inspection, Plate nail nails, with the module will be consistent after the floor gap model and then nail. Question 4: The main reason for local warping drum In "
24x36 cork board framed ,
nama barang membuat pagar "
"
remove melted crayon composite deck ,
modern wood wall panels exterior "
