1, a small area of ??wooden floor water:The first thing to do, of course, is to dry the water, dry the surface of the floor with a dry cloth first, and then you can choose a practical vacuum cleaner in the stained seam water sucking the floor or use the cold wind blower To dry; then you can use some heavy pressure in a small area of ??the area from the Alice, after a period of time the wooden floor will be back to its normal. If after some time, the joints are drum kicking down, but with the floor before the original difference is too far, you can try to wax the floor, the basic water after waxing floor will be almost the same as the original. If the wax floor color, shape and the original is still a big difference, then only the local replacement of the floor.2, wooden floor water situation is serious:If there is a large area of ??the phenomenon of soaked water, then we can not be so simple to deal with, and should carefully pry the floor up, according to "well" type superimposed on the display in the ventilated place dry, with the weight of the overlay to prevent deformation The occurrence of, under normal circumstances for better quality solid wood flooring can be re-used.3, to strengthen the floor soaked in water:Whether it is a large area of ??water or a small area of ??water, it is not recommended to pry the floor to dry, so easy to damage the floor, it is likely to cause serious consequences can not be used again. It is best to quickly drain the surface of the floor water, and then remove the floor baseboard, showing the expansion joints, the expansion joints will be distributed to the water vapor, but according to the different amount of water, drying up usually takes about seven to fifteen days, for the quality Better or less water immersion products can be self-recovery, if not restored after 15 days should be considered to be replaced."
rustic wood plastic wall panel,
composite stair construction railing,
install a threshold on laminate "
