1, the ground is not smooth, bumpy pits, floor pavement, moisture-proof membrane was pad break, resulting in breathable. Take measures to flatten the floor before installing the floor.2, pavement, there is sand on the ground, not clean, moisture-proof membrane pad broken, resulting in breathable. The measure is to clean the ground before paving. Moisture-proof membrane pavement junction no sticky, resulting in breathable. Should be moisture-proof tape sticky tape, the best width of 60mm plastic tape to ensure moisture-proof membrane is not breathable.3, the use of electric heating in some areas, due to electricity using the peak, valley, flat fee method, that is, after 12 o'clock half price (valley), many users turn off the switch during the day and after 12 o'clock in the evening the electric equipment to open and The indoor temperature is adjusted to 27 ~ 30 ??, the surface temperature reaches nearly 100 ?? in a short time, resulting in moisture-proof membrane damage, resulting in breathable, the floor discoloration, deformation. This violates the geothermal heating (surface temperature control at about 40 ??) requirements. It is recommended that users should change to continuous heat supply for 24 hours. Otherwise, the user should be responsible for causing discoloration.4, wood flooring pavement and wet interface joints, such as: bathroom, kitchen, shady balcony, etc., should be back up moisture-proof membrane, with a moisture-proof membrane wrap the edge of the floor to prevent moisture to enter, reduce and avoid the Area floor discoloration and deformation."
precast fence forms two foot by six foot,
composites for concrete porches,
can be nailed interlocking floor tiles "
