Because of its high efficiency,convenience and economy, the green cutting disc has been widely used in many
industries. However, many people do not have a clear understanding of the specific
properties of the cutting piece and the use of different cutting pieces. Years
of experience to share with you the correct choice and use of the cutting
piece:
The
green cutting disc can be dividedinto cutting type and grinding type. Most of the cutting machine is fixed
mobile type, and the power of the machine has high power (>5.5KW) and low
power (<3KW). The cutting speed will also be High-speed cutting (>80m /
s) and ordinary cutting. In addition, cutting materials are varied, such as
stainless steel, titanium alloy, ordinary steel, viscous metal, high carbon
steel, non-metal, etc. Performance requirements are different, so it is
important to choose a reasonable slice.
Ordinary cutting machines usually referto fixed cutting machines, cutting machines with power <3KW and rotation
speed of 2900 rpm. Ordinary cutting machines usually cut workpieces with a
diameter less than 50mm. However, due to the small cutting power in order to
reduce the radial frictional resistance, this When we usually choose a cutting
piece with a thickness of 3.2mm, the cutting piece is thinner and has a certain
elasticity, and it will feel sharper when cutting.
