EMC DEE-1721 Practice Test Questions - DEE-1721 Exam Study Material

It is not so much difficult now to pass Realexamdumps by the first attempt if you make DEE-1721 Dumps your choice. This helping material has changed the way students used to prepare their exam by collecting data from different sites and then to compile them and still filtration was needed. Expert – Implementation Engineer, SC Series Exam Study Material gives you apposite knowledge about each concept in the course outline. You are not loaded with extra information to confuse you between the concepts. Clarity and comprehensiveness are the tools of Realexamdumps.You are familiarized with the questions which you will, most probably, face in your exam. You can download this material in PDF for your best reading experience but before downloading complete file you have the option to download Free Demo Questions to be satisfied with the quality of the stuff.

Demo Question:1

Several servers connected to the Storage Center through FC fabrics using WWN zoning. You recently replaced a server’s FC HBA; however, the server no longer connects to the Storage Center. What is causing this issue? 
 
A. Storage Cento fault domains must be updated with the new HBA WWN 
B. Storage Center fault domains must be converted to Virtual Pat Node 
C. Server's zone must be updated with the new switch port to which the HBA is connected 
D. Server's zone must be updated with the new NBA WWN 

Answer: D 

Demo Question: 2     

A storage administrator has multiple servers connected to the Storage Center through two iSCSI networks. You use a software iSCSI Initiator on the servers and the Storage Center runs in Virtual Port Mode. Which IP address is required in the iSCSI Initiator for proper connectivity? 
 
A. Primary IP address for each domain 
B. Control Port IP address for each domain 
C. Reserve IP address for each domain 
D. Management IP address of each controller 
 
Answer: B 

Demo Question:3

Which processes should be used when testing controller failover on a newly installed Storage Center? 
 
A. Start server IO to a volume, restart a controller, then rebalance ports and ensure no IO errors. 
B. Start server IO to a volume, restart either controller, and ensure no IO errors are reported. 
C. Start server IO to volumes owned on each controller, restart the controllers sequentially, and ensure no IO error. 
D. Start server IO to volumes owned on each controller, restart the controllers simutaneously. and ensure no IO error. 
 
Answer: D