Demo Question:1
Several servers connected to the Storage Center through FC fabrics using WWN zoning. You recently replaced a server’s FC HBA; however, the server no longer connects to the Storage Center. What is causing this issue?
A. Storage Cento fault domains must be updated with the new HBA WWN
B. Storage Center fault domains must be converted to Virtual Pat Node
C. Server's zone must be updated with the new switch port to which the HBA is connected
D. Server's zone must be updated with the new NBA WWN
Answer: D
Demo Question: 2
A storage administrator has multiple servers connected to the Storage Center through two iSCSI networks. You use a software iSCSI Initiator on the servers and the Storage Center runs in Virtual Port Mode. Which IP address is required in the iSCSI Initiator for proper connectivity?
A. Primary IP address for each domain
B. Control Port IP address for each domain
C. Reserve IP address for each domain
D. Management IP address of each controller
Answer: B
Demo Question:3
Which processes should be used when testing controller failover on a newly installed Storage Center?
A. Start server IO to a volume, restart a controller, then rebalance ports and ensure no IO errors.
B. Start server IO to a volume, restart either controller, and ensure no IO errors are reported.
C. Start server IO to volumes owned on each controller, restart the controllers sequentially, and ensure no IO error.
D. Start server IO to volumes owned on each controller, restart the controllers simutaneously. and ensure no IO error.
Answer: D