technical problem

1117 views 8 replies
Reply to Topic
aashiq

Age: 79
Total Posts: 830
Points: 0

Location:
Coventry, United Kingdom
what would be the reason for acomputer when loading up (before windows ) shows a message conflict I/O ports:378

please reply as my computer is not working properly!
Posted 31 Oct 2003

~Fragi~ says
tell me .. r ya on LAN ... ???
Posted 31 Oct 2003

MrDeath says
well this happen generally when ya add a new hardware on a motherboard which is all in one...

for example u add a internal modem ..n u have a onborad modem as well...

go look for a jumper settin..
Posted 01 Nov 2003

aashiq says
well I added a hard drive and then it said fat32 errors and a lot more and the I took it out and replaced the leads they were before and then the conflict I/O port 378 message starting appearing.
by jumper settings do u mean the leads form motherboard to hard drive? how are they set?
Posted 03 Nov 2003

jag says
378 is port of Printer..

so you have a conflict on the lpt 2 printer port. go to the cmos setup/ normally press del when the computer starts/ and just change the printerport setting to something else or for time being just disable it /if you dont use printer or any other type device from the printerport you can leave it disabled...

or simply Go into cmos & set up the defaults.

hope that should work :)
Posted 04 Nov 2003

aashiq says
thank you everyone that problem with the i/o ports is sorted i had to change the port number on cmos and now its no conflict and its found it thanks again

but theres one problem with it when it loads up it start playing a tone from within the computer which it obviously shouldn't do and no wit doesn't even load windows any ideas?
i've tried reinstalling windows then it loads about twice with the tone playing and then its stop loadng win98
Posted 06 Nov 2003

MrDeath says
well... yo cant explain yr problem here... go ask some frns...
Posted 14 Nov 2003

valandrian says
bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175
bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175
bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175
bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175
bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175
bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175
bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175
bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175
bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175
bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175
bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175bd30175
bd30175
Posted 03 May 2018

Posted 27 Sep 2018

Reply to Topic