The glue that is extruded at installation should be wiped out in time.The surface roughness error is less than 1mm, the width of the slit is less than 0.3mm, the flatness error of skirting board is less than 3mm, and the error of 3mm flatness is less than 2mm.When the solid wood floor is in maintenance, must keep the floor dry, clean, don't wet or use salt water, soap water, to avoid damage to the brightness of the paint.If there is ash or dirt, can be used dry cloth to wipe.It is also necessary to make wax once a month, but wipe the water and the stain clean before waxing.
If there is a leak in the heating and the wood floor there is water must be cleaned in time, can not directly let the sunlight or the furnace to bake, so as to avoid drying too fast, the floor cracking.Solid wood floor long-term, do not use plastic sheeting or newspaper cover, because the time is long, the paint film will be sticky, lose luster.
"
ideas for under deck patios ,
stain resistant wpc indoor decoration wall cladding ,
prefabricated houses china suppliers wall siding ,
wood fencing manufacturers in london "
